How can I use my chip resetter?To use your chip resetter, do the following steps 1) Remove white plastic piece around the pins of the chip resetter. 2) Simply line up your Epson OEM or compatible ink cartridge with the notches on the bottom of the resetter (different size notches for the different cartridge designs.) The pins on the resetter should line up with the contacts of the chip on the ink cartridge. 3) Press the resetter's pins to the chip firmly. The red and green LED’s should turn on and off after pressure is applied. If the green light flashes 5 times the chip is reset. If the red light flashes you will need to try to line up the cartridge and try again. 4) Finally, once the LED light stops blinking green, the ink cartridge is reset and ready to print.
(
Related Page 1) (
Related Page 2) (
Related Page 3)
Keywords:
Epson cartridges Epson chip resetter chip reset resetting cartridges Return to the
Knowledgebase Questions and Answers