How do I install the print head and ink for Canon Pixma iP90?To install the printhead for Canon Pixma ip90; Open the paper support and paper output slot cover of the printer. Then power the Canon Pixma printer on. Open the print head cover. The print head holder moves to the center. Pinch and lift the print head lock lever at the front of the print head holder. Remove the print head from its package and remove the orange protective cap that covers the bottom of the print head. Insert the print head into the print head holder so that the "^" mark faces the "V" mark. Lower and close the print head lock lever fully until you hear a click. Remove the black ink tank (BCI-15 Black) from its package. Hold the ink tank as shown in the illustration, and remove the orange protective cap, while lifting in the direction of the arrow. Set the Black ink tank at an angle in the back so that the ">" mark on the ink tank faces the "<" mark on the print head lock lever. Press down on the
mark on the ink tank until you hear a click. Insert the color ink tank (BCI-16 Color) in the same way. Finally. Close the print head cover. The print head moves to the right.
(Source) (Related Page 1) (Related Page 2) (Related Page 3)
Keywords: ink refill printer ink change printer ink repair
Return to the Knowledgebase Questions and Answers